$120 up-charge if you choose to have your reel spooled up on your combo when it arrives to your doorstep. We recommend hollow core braid spliced into 150-200 yards of monofilament on this combo with blue or orange hollow core braid color options, and blue, clear, yellow, or orange mono color options.
If you want any other line or different pound line, please feel free to contact us.
REEL Information:
Okuma Makaira MK-30IISEA-SILVER
The silver etched yellowfin tuna glistens as bright as the sea on top of the matte black anodized aluminum frame. This reel is as smooth as it is sleek with its Carbonite Dual Force drag system and its helical-cut gears. It’s oversized handle and lower low-speed gearing versus the original Makaira serve up extreme torque for the Makaira SEa. The Makaira SEa Silver as well as the Makaira family, are all backed by a 5-year warranty.
Open spool bearings with TSI-301 oil. Increases freespool 2-1/2 times.
• All non-spool bearings feature full grease pack for maximum longevity.
• SE reels will feature a yellowfin tuna etched into the side plate.
• Frames have been machined out for increased clearance between spool and cross bars.
• New lower speed 1.3:1 gear ratio featured in 20/30 sizes.
• 6061-T6 Machined aluminum frame with forged side plates
• 17-4 stainless steel gearing
• Helical cut gears for increased torque, smoothness and improved gear meshing
• Makaira reels all feature two-speed gearing systems
• Cold forged, Type-II anodized, machined aluminum spool
• CRC: Corrosion-Resistant Coating process
• Patented spool pin system for use with braided or mono lines
• Carbonite Dual Force Drag system featuring Cal’s universal drag grease
• Custom designed thrust bearing: Alleviates side load on heavy drag settings
• 4-pcs ABEC-5 precision Sapporo stainless steel ball bearings
• Double dog, proprietary silent anti-reverse system
• Ratcheting drag lever and drag cam for precise drag setting
• Patented T-Bar handle with Easy Roll graphite insert on all models
• Heavy duty stainless steel ratcheting clicker system
• Heavy duty, 17-4 grade stainless steel drive and spool shafts
• Type-II gunmetal anodized frame, side plates, spool, drag lever and handle
• Open top frame design on MK-5II, 10II, 15II, 20II, 30II
• Lug and plug system on all open top reel models
• Machined thumb rest on rear cross bar for improved ergonomics
• Forged aluminum, full hard anodized reel foot and reel clamp
• Precision placement of drain holes maximizes water removal from reel
• Special screw ports around side plate screws reduces water/corrosion buildup
• Makaira lever drag reels are backed by a 5-year warranty
Model: MK-30IISEA-SILVER
Bearings: 4BB + 1TB
Braid Line Capacity: 800-YDS OF 100-LBS (HC)
Gear Ratio: 3.8:1 & 1.7:1
Line Capacity: 850/30 (0.55), 700/40 (0.60), 550/50 (0.70)
Line Retrieve: 39.4" & 17.5"
Max Drag at Strike: 37-LBS
Max Drag Pressure: 55-LBS
Weight: 50oz
ROD Information:
Okuma ECS-T-641MH
Roller Stripper and Roller Tip. 6-foot, 4-inch Medium Heavy. Rated for 30-80lb line.
The new Okuma ECS Custom rods are constructed with a hybrid 24-ton carbon and e-glass blank technology that features Okuma’s UFR-II: Ultimate Flex Reinforcement rod tip technology for the ultimate in lifting power.
With the brute strength and drag ripping speed that is possible on the east coast, Okuma went with only high-end components on the ECS Custom rods. All spinning and casting rods feature ALPS deep press 316-grade stainless steel guide frames with zirconium inserts. Models with All Roller Guides feature ALPS RX Series Rollers.
All ECS Custom rods also feature machined aluminum, anodized rod gimbals.
- Hybrid 24-ton carbon and e-glass blank construction
- UFR-II: Ultimate Flex Reinforcement rod tip technology
- ALPS deep press 316-grade SS frames with Zirconium inserts
- Model featuring roller guides use ALPS RX series rollers
- Machined aluminum, anodized rod gimbals
- ECS Custom rods are backed by a 3-year limited warranty
